F107150-02AlberTineAlberTine
10 Disconnect the range from the electricity supply. Remove the control panel. Remove the plinth, 3 screws. Undo the l
11Remove the two screws fixing the thermostat to the inner control panel and disconnect the wiring from the thermostat. Fit the replacement in reverse
12 Disconnect the range from the electricity supply.Remove pan support and burner head. Undo the large brass nut a
13ArtNo.281-0017 - Removing the doorPlace the outer panel on a clean flat surface.The door trim
14ArtNo 281-0149 - USA oven fan element
15 Remove the cooktop (see section 4).Remove the two screws on the centre rai
1611. Technical Data
17ArtNo.080-0023 - LC Albertine 36 USA circuit diagram
19
Troubleshooting 3Servicing Notes 71 To change an oven lightbulb 82 To move range for servicing 83 To remove the oven door 84 To remov
ArtNo280-0093 Back Cover Bar
3 Open the oven door and turn on the oven lightsOne bulb does not workLight bulb failed (most likely cause)Both lights do n
4TROUBLESHOOTING - CHECKING THE OVENArtNo.280-0117 - MF Oven Element Servicing
5The maintop burners have spark ignition operated by a switch on each control valve. When any burner control knob is pressed in t
6A. Check continuity of h.t wire from spark module to spark electrode.B. Visually check for spark tracking from h.t. components to earthed m
7When servicing or replacing gas carrying components disconnect from gas before commencing operation and check range is gas sound after
8 Turn off the power at the circuit breaker.Make sure the oven is cool. Open the oven door and remove the oven racks.Unsc
9With your hands griping under the control panel slide, the range forward to disengage from the anti-tip bracket.
Comments to this Manuals